A desoldering pump, also known as a solder sucker, is a hand-held device that uses a plunger to create a vacuum to remove solder from a printed circuit board (PCB).
Radio Shack has a variety of desoldering pumps, including the 12-volt Desoldering Pump (cat. no. 64-2039), which is designed to remove solder from large surfaces. The Desoldering Pump has a built-in LED work light, and comes with a five-foot power cord, a solder-sucking head, and a five-year limited warranty.
The Desoldering Pump is powered by a 12-volt DC power supply (sold separately), and is designed to remove solder from large surfaces. It has a built-in LED work light, and comes with a five-foot power cord, a solder-sucking head, and a five-year limited warranty.
Contents
Is desoldering pump necessary?
Is desoldering pump necessary?
Desoldering pumps are often seen as necessary tools for any electronics hobbyist or professional. However, there are times when they are not necessary. In most cases, a desoldering pump is most useful when there is a large quantity of solder to be removed. If the solder is only in a small area, a desoldering braid may be a more efficient option.
When choosing a desoldering pump, it is important to consider the size of the component to be removed. If the component is large, a pump with a large barrel will be more efficient. If the component is small, a pump with a small barrel will be more efficient.
It is also important to consider the type of solder to be removed. Some solders are more difficult to remove than others. In these cases, a desoldering pump with a higher wattage may be necessary.
Ultimately, the decision of whether or not to use a desoldering pump is up to the individual. If the solder is in a difficult-to-reach place, a pump may be necessary. If the solder is in a large quantity, a pump may be more efficient. If the solder is easy to remove, a braid may be a better option.
Which is better desoldering pump or wick?
Desoldering pumps and wicks are both tools used to remove solder from a circuit board. They both have their pros and cons, so which is the best option for you?
Desoldering pumps are handheld tools that use a vacuum to remove solder. They are quick and easy to use, and they can remove a lot of solder in a short amount of time. However, they can be expensive, and they can be difficult to use if the solder is clogged.
Wicks are thin metal wires that are coated in a solder-absorbing material. They are slow and methodical, but they are also cheap and easy to use. They are best for removing small amounts of solder.
Is a desoldering pump reusable?
Solder is a metal alloy that is melted and used to join two metal objects together. It is usually applied through a process called soldering. Soldering irons are used to heat the solder and the objects to be joined, and the solder is then melted and flows between the objects, filling any gaps.
When a soldering job is complete, there may be some excess solder left on the objects that were joined. This can be removed by using a desoldering pump. A desoldering pump is a handheld device that has a squeeze bulb at one end and a nozzle at the other. When the bulb is squeezed, the air inside is forced out through the nozzle, and this creates a vacuum. This vacuum sucks the excess solder out of the joint.
Desoldering pumps can be reused many times. They should be cleaned after each use by rinsing them in hot water and then drying them with a cloth.
How do I choose a desoldering pump?
When it comes to desoldering, there is no single perfect solution for everyone. Different people have different needs and preferences, so it’s important to find the desoldering tool that is best for you.
One option is a desoldering pump. Desoldering pumps are handheld tools that use a suction to remove solder from a circuit board. They are a popular option for hobbyists and DIYers, because they are easy to use and relatively affordable.
When choosing a desoldering pump, there are a few things to consider. The first is size. Desoldering pumps come in a variety of sizes, so you need to choose one that is the right size for the job. The second consideration is the type of nozzle. Some nozzles are better suited for removing large amounts of solder, while others are better for precision work.
The third thing to consider is the type of pump. There are two types of pumps: manual and automatic. Manual pumps require you to use your hand to create the suction, while automatic pumps do it automatically. Automatic pumps are generally more expensive, but they are easier to use.
Finally, you need to consider the price. Desoldering pumps range in price from around $10 to $100. If you are a beginner, it is best to start with a lower-priced pump and work your way up as you gain experience.
When choosing a desoldering pump, it is important to consider your needs and preferences. There is no one-size-fits-all solution, so find the tool that is best for you.
How do I desolder without a solder pump?
Desoldering is the process of removing solder from a printed circuit board (PCB) or other electrical connection. There are a few different ways to do this, but one of the most common methods is to use a solder pump. If you don’t have a solder pump, however, there are a few other methods you can use.
One way to desolder without a solder pump is to use a desoldering braid. This is a thin piece of copper wire that is covered in a flux that helps to remove the solder. To use it, you first need to heat the solder up until it is liquid. Then, you put the braid over the solder and use a small screwdriver to push down on it. This will help the braid to absorb the solder.
Another way to desolder without a solder pump is to use a vacuum desoldering tool. This is a tool that attaches to your vacuum cleaner, and it uses the vacuum to suck the solder out of the connection.
Finally, if you don’t have a solder pump or a vacuum desoldering tool, you can use a soldering iron. To do this, you first need to heat the solder up until it is liquid. Then, you use the soldering iron to remove the solder from the connection. Be careful not to damage the PCB or the other components on the board.
What temperature should I desolder?
There is no definitive answer to the question of what temperature you should use to desolder a component, as it depends on a number of factors, including the type of component, the type of solder, and the type of desoldering tool. However, a temperature of between 350 and 400 degrees Fahrenheit is generally considered to be safe for most components and solder joints.
There are a number of ways to determine the temperature of your desoldering tool. One is to use a temperature gun, which will give you an accurate reading of the temperature at the tip of the tool. Another is to use the color of the solder to gauge the temperature. For example, if the solder is a light pink color, it is likely that the temperature is below 350 degrees Fahrenheit. If the solder is a dark orange color, it is likely that the temperature is above 400 degrees Fahrenheit.
In general, it is best to start with a lower temperature and increase the temperature as needed. If the component does not come loose after applying heat for a few seconds, you can increase the temperature. However, be careful not to apply too much heat, as this can damage the component or the solder joint.
How do you remove IC chip from circuit board?
There are a few different ways to remove an IC chip from a circuit board. One way is to use a heat gun to heat up the solder around the chip, and then use a plunger or pincers to remove the chip. Another way is to use a desoldering pump to remove the solder, and then remove the chip using tweezers.