Adding an amplifier and subwoofer to your car’s sound system can really improve the quality of your music listening experience. However, if your car doesn’t have an aftermarket stereo, adding a subwoofer can be a bit tricky. In this article, we’ll show you how to hook up subs to a stock radio.
You will need:
– A subwoofer
– An amplifier
– Wiring
– A car
The first thing you need to do is figure out how you want to wire your system. There are three main ways to do this: series, parallel, and series/parallel.
With series wiring, the current flows through one speaker and then to the next. With parallel wiring, the current splits between the two speakers. With series/parallel wiring, the current flows through both speakers, but at different levels.
For this tutorial, we’ll be using series wiring.
Next, you’ll need to find the positive and negative terminals on your amplifier. The positive terminal is usually red, and the negative terminal is usually black. On your subwoofer, the positive terminal is usually red, and the negative terminal is usually black or green.
Once you’ve identified the positive and negative terminals, you’ll need to find a way to mount your amplifier. Many amplifiers come with a mounting kit, but if yours doesn’t, you can use the screws that came with your subwoofer.
Now that you’ve got your amplifier mounted, it’s time to wire it up. First, connect the positive terminal on the amplifier to the positive terminal on the subwoofer. Then, connect the negative terminal on the amplifier to the negative terminal on the subwoofer.
Finally, connect the power cable to the amplifier and the car’s battery. Make sure the car is turned off before doing this.
Now, it’s time to test your system. Turn on the car and the amplifier. Then, turn on the subwoofer. You should hear the bass coming from your subwoofer.
If you’re not happy with the level of bass, you can adjust the gain on your amplifier. This will increase or decrease the amount of power that the amplifier sends to the subwoofer.
Adding a subwoofer to your car’s sound system can really improve the quality of your music listening experience. By following the steps in this article, you can easily hook up subs to a stock radio.
Contents
Can you hook subs to a stock stereo?
Many newer vehicles come with stereo systems that feature built-in subwoofers. If you have a vehicle like this, and you want to add an additional subwoofer or two, can you hook them up to the stock stereo?
In most cases, the answer is yes. All you need is an amplifier that is compatible with the stock stereo and the appropriate speaker cables. The amplifier will plug into the stereo’s auxiliary input jack, and the speaker cables will connect from the amplifier to the subwoofers.
If your vehicle does not have a built-in subwoofer, you can still add one by using an aftermarket stereo system. The process is basically the same as described above, except you will need to install the new stereo system yourself.
Adding a subwoofer to your vehicle can really enhance the audio experience. Not only will you hear the bass notes more clearly, but you will also feel them more intensely. So if you are looking for a way to improve the sound quality of your car stereo, adding a subwoofer is a great way to do it.
Can I hook a sub and amp to stock stereo?
It is possible to hook a sub and amp to a stock stereo, but there are a few things you need to consider before doing so.
The first thing you need to think about is how you want to power your sub and amp. If your car has a built-in amplifier, you can use that to power your sub and amp. However, if your car doesn’t have a built-in amplifier, you’ll need to buy an aftermarket amplifier.
The next thing you need to think about is how you want to connect your sub and amp to your stereo. There are a few different ways you can do this, and the method you choose will depend on the type of stereo you have.
If you have a CD player in your car, you can connect your sub and amp to the CD player using RCA cables. If you have a radio in your car, you can connect your sub and amp to the radio using a wiring harness.
Once you’ve powered and connected your sub and amp, it’s time to set them up. The best way to do this is to use a subwoofer enclosure. This will help to improve the sound quality of your sub and amp and will also help to protect them from damage.
If you’re not sure how to set up your sub and amp, or if you need help choosing the right enclosure, contact a professional car audio installer. They will be able to help you get the most out of your sub and amp and will ensure that they are properly installed and configured.
How do I hook up subs to AMP and factory radio?
So you want to add some bass to your car’s sound system? It’s not difficult to do, but there are a few things you need to know. In this article, we’ll show you how to hook up subs to an amplifier and a factory radio.
The first thing you need to do is figure out which speaker wires in your car are for the front speakers and which are for the rear speakers. In most cars, the front and rear speakers are located in different parts of the car. The front speakers are usually in the door panels, while the rear speakers are in the back panel.
Once you’ve figured out which wires are for the front and rear speakers, you need to determine which of these wires are for the left speaker and which are for the right speaker. In most cars, the left and right speakers are wired in a stereo configuration, with the positive and negative wires for each speaker separated by a few inches.
Now that you know which wires are for the left and right speakers, you can hook up your subs. First, make sure that your amplifier is turned off. Then, connect the positive wire from the amplifier to the positive wire from the subwoofer, and connect the negative wire from the amplifier to the negative wire from the subwoofer.
Next, connect the positive wire from the left speaker to the positive wire from the subwoofer, and connect the negative wire from the left speaker to the negative wire from the subwoofer. Finally, connect the positive wire from the right speaker to the positive wire from the subwoofer, and connect the negative wire from the right speaker to the negative wire from the subwoofer.
Once you’ve hooked up the subs, you can turn on the amplifier and the radio. If everything is hooked up correctly, you should be able to hear the subs playing when you play music.
Can I use a sub without an amp?
Yes, you can use a subwoofer without an amplifier, but it won’t produce the best sound.
If you’re just looking for a little bit of extra bass, you can use the subwoofer’s built-in amplifier. However, if you want the best possible sound quality, you’ll need to use an external amplifier.
Keep in mind that using a subwoofer without an amplifier may result in lower sound quality and distorted bass.
How do you hook up a converter to a factory radio?
There are a few different ways that you can hook up a converter to a factory radio. One way is to use a converter box, which will change the signal from the factory radio to a format that the aftermarket receiver can understand. You can also use a wiring harness that will plug into the factory radio and the aftermarket receiver. This is a more direct route, and does not require a converter box.
Do I need to bypass factory amp?
One of the main benefits of installing a car audio amplifier is the ability to improve the sound quality of your music. However, if your car already has a factory amplifier, do you need to bypass it in order to install a new amplifier?
In most cases, the answer is no. The factory amplifier is designed to handle the power requirements of the car’s stock speakers, so bypassing it is not necessary. However, if you are installing a new amplifier with significantly more power than the factory unit, you may need to bypass the factory amplifier in order to prevent it from becoming overloaded.
If you are unsure whether or not you need to bypass the factory amplifier, consult with a qualified car audio installer. They will be able to help you determine whether or not it is necessary and, if so, they can help you take care of the necessary steps.
How do you wire a RCA cable to a stock radio?
RCA cables are a common way to connect audio devices, and are often used to connect a stock radio to an aftermarket amplifier. There are a few ways to do this, and the method you choose will depend on the type of radio and amplifier you have.
One way to connect an RCA cable to a stock radio is to use a Y-splitter. This will allow you to connect the RCA cables to the radio and the amplifier at the same time. Another way to connect the RCA cables is to use a signal splitter. This will allow you to send the signal from the radio to the amplifier, and will also allow you to control the volume of the amplifier separately from the radio.
If you have an aftermarket radio, you can connect the RCA cables directly to the radio. You will need to find the RCA input on the back of the radio, and then connect the cables to the input. You can then control the volume of the amplifier using the volume control on the radio.
No matter which method you choose, make sure that the RCA cables are properly connected to the radio and the amplifier. If the cables are not connected properly, you may not get any sound from the amplifier.