If you have a Chevy Cruze and the radio suddenly stops working, don’t worry – you can reset it yourself. Here’s how:
1. Turn the car off and remove the key from the ignition.
2. Open the driver’s side door and locate the small black box below the dashboard on the left side.
3. Remove the cover from the box and locate the reset button.
4. Press the reset button and hold it for three seconds.
5. Replace the cover on the black box and re-insert the key into the ignition.
6. Turn the car on and the radio should now be working.
If the reset button doesn’t work, you can also try disconnecting the battery for a few minutes.
Contents
- 1 How do I reset my Chevy radio?
- 2 How do you reset the radio on a 2017 Chevy Cruze?
- 3 How do I reset my 2012 Chevy Cruze?
- 4 How do you reset the Bluetooth on a 2014 Chevy Cruze?
- 5 Why is my radio display not working?
- 6 Why is the radio in my car not working?
- 7 How do you reset the radio on a 2018 Chevy Cruze?
How do I reset my Chevy radio?
If you’re having trouble with your Chevy radio, you may need to reset it. This article will show you how to do that.
First, turn off the car and take out the key. Then, open the driver’s side door and remove the radio’s faceplate. There should be a small hole in the center of the faceplate.
Next, use a paper clip or something similar to press and hold the reset button for about five seconds. After that, put the faceplate back on the radio and turn it on. The radio should now be reset.
How do you reset the radio on a 2017 Chevy Cruze?
If your 2017 Chevy Cruze radio isn’t working properly, resetting it may fix the problem. To reset the radio, press and hold the power button for about five seconds until the radio turns off. Then, press and hold the power button again for about five seconds until the radio turns on. If the radio still isn’t working properly, you may need to take it to a Chevrolet dealership for repair.
How do I reset my 2012 Chevy Cruze?
There are a few ways that you can reset your 2012 Chevy Cruze. One way is to use the reset button on the instrument panel. To do this, press and hold the button for about five seconds until the indicator light turns off. Another way to reset your Cruze is to disconnect the negative battery cable for about five minutes. Finally, you can also use the OnStar RemoteLink app to reset your car.
How do you reset the Bluetooth on a 2014 Chevy Cruze?
If you’re having trouble connecting to Bluetooth devices in your 2014 Chevy Cruze, you may need to reset the Bluetooth. This article will show you how.
First, make sure your Cruze is turned on.
Then, press and hold the Bluetooth button on the infotainment system for about five seconds.
The Bluetooth light will start blinking, and you’ll be able to connect to Bluetooth devices again.
Why is my radio display not working?
If your car radio isn’t working, there are a few things you can do to troubleshoot the problem.
First, check the fuse. If the fuse is blown, replace it.
If the fuse is not blown, check the power connection. Make sure the connection is clean and tight, and that the power is turned on.
If the power is on and the fuse is not blown, the problem may be with the radio. Try turning it off and on.
If the radio still doesn’t work, it may need to be serviced.
Why is the radio in my car not working?
There are a few reasons why the radio in your car might not be working. One possibility is that the car’s battery is dead. If the car’s battery is dead, the radio will not turn on. Another possibility is that the radio is not receiving a signal. If the radio is not receiving a signal, it will not turn on. Finally, the radio might be broken. If the radio is broken, it will not turn on.
How do you reset the radio on a 2018 Chevy Cruze?
The 2018 Chevy Cruze comes equipped with a radio that can be reset in the event that it becomes unresponsive. There are a few different ways to go about resetting the radio, so it’s important to know which method will work best for your specific situation. In this article, we will cover the three most common ways to reset the radio on a 2018 Chevy Cruze.
If your radio is not responding or you are having trouble connecting to the Bluetooth, you can try resetting it by following these steps:
1. Turn the car off and remove the key from the ignition.
2. Open the driver’s side door and locate the fuse panel.
3. Find the fuse for the radio and pull it out.
4. Wait about five minutes and put the fuse back in.
5. Turn the car on and try the radio again.
If the radio still doesn’t work, you can try resetting it using the on-board diagnostics (OBD) port. To do this, you will need a scan tool or a phone with a diagnostic app.
1. Turn the car off and remove the key from the ignition.
2. Open the driver’s side door and locate the OBD port.
3. Plug the scan tool or phone into the OBD port.
4. Turn the car on and wait for the scan tool to connect.
5. Select the “Radio” option.
6. Select the “Reset” option.
7. Follow the on-screen instructions to reset the radio.
If the radio still doesn’t work, you can try resetting it using the Chevrolet MyLink app.
1. Download the Chevrolet MyLink app onto your phone.
2. Open the Chevrolet MyLink app and login to your account.
3. Select the “Radio” option.
4. Select the “Reset” option.
5. Follow the on-screen instructions to reset the radio.