Radio Shack scanner codes for police are a valuable asset for those who want to be able to communicate with law enforcement officials. By having a list of these codes, you will be better equipped to handle any emergency situation.
The first code is 10-0, which is used to indicate that you need assistance. 10-1 is used to indicate that you are having difficulty with your radio, while 10-3 means that you have traffic for the officer. 10-4 is used to indicate that you have received the message, while 10-7 means that you are off the air.
10-8 is used to indicate that you are on duty, while 10-9 means that you are off duty. 10-12 is used to indicate that you have a contact, while 10-13 is used to indicate that you need to contact a specific department or individual. 10-16 is used to indicate that you are available for backup, while 10-17 is used to indicate that you are going to the scene of an incident.
10-19 is used to indicate that you are returning to the station, while 10-20 is used to provide your location. 10-21 is used to say that you have arrived at the scene, while 10-22 is used to say that you are leaving the scene. 10-23 is used to say that you are returning to the station, while 10-26 is used to indicate that you have a prisoner in custody.
10-27 is used to say that you are stopping a vehicle, while 10-28 is used to say that you are checking a vehicle. 10-29 is used to say that you are following a vehicle, while 10-30 is used to indicate that you are stopped at a roadblock. 10-31 is used to say that you are investigating a crime, while 10-32 is used to say that you are requesting backup.
10-33 is used to say that you have a emergency, while 10-34 is used to say that you have a traffic accident. 10-35 is used to say that you are requesting a ambulance, while 10-36 is used to say that you are requesting a tow truck. 10-37 is used to say that you have a suspicious person, while 10-38 is used to say that you have a suspicious vehicle.
10-39 is used to say that you have a crime in progress, while 10-40 is used to say that you need assistance. 10-41 is used to say that you have a weapons offense, while 10-42 is used to say that you have a disturbance. 10-43 is used to say that you have a domestic disturbance, while 10-44 is used to say that you have a mental illness.
10-45 is used to say that you have a robbery, while 10-46 is used to say that you have a burglary. 10-47 is used to say that you have a theft, while 10-48 is used to say that you have an assault. 10-49 is used to say that you have a homicide, while 10-50 is used to say that you have a fire.
10-51 is used to say that you have a public service call, while 10-52 is used to say that you have a hazardous material. 10-53 is used to say that you have a bomb threat, while 10-54 is used to say that you have an accident. 10-55 is used to say that you have a civil disturbance, while 10-56 is used to say that you have a missing person.
10-57 is used to say that you have a
Contents
- 1 Can you listen to your local police scanner?
- 2 How do I program my radio Shack NOAA scanner?
- 3 How do I program my radio Shack digital trunking scanner?
- 4 How do I program my 800 MHz scanner?
- 5 How can I listen to a trunked police radio?
- 6 Can you use a CB radio as a police scanner?
- 7 How do you program a handheld police scanner?
Can you listen to your local police scanner?
In recent times, police scanners have become more prevalent in society. People use them to listen to local law enforcement activity in their area. While some people may think that this is a harmless pastime, doing so can actually be dangerous and illegal.
Police scanners allow people to listen in on local law enforcement activity. This can include police, fire, and ambulance communications. By listening to police scanners, people can get information about ongoing emergencies and traffic accidents. This can be valuable information for people who live in the area.
However, there are some dangers associated with listening to police scanners. First of all, doing so can be illegal in some areas. In the United States, for example, it is illegal to use a police scanner to interfere with law enforcement activity. This means that people can be arrested for listening to police scanners and then calling in fake emergencies.
Another danger of listening to police scanners is that it can give people a false sense of security. By knowing what is going on in the area, people may think that they are prepared for anything. However, emergencies can still happen even if people are listening to the scanner.
Finally, listening to police scanners can be dangerous because it can give away personal information. This is especially true if people are listening to scanners in a populated area. By knowing where people are and what they are doing, criminals can target them for crimes.
Overall, while listening to police scanners can be beneficial, there are also some dangers associated with it. People should weigh the pros and cons of listening to scanners before deciding whether or not to do so.
How do I program my radio Shack NOAA scanner?
There are a few different ways that you can program your Radio Shack NOAA scanner. The first way is to use the keypad on the scanner itself. To do this, you will need to know the frequency of the weather station that you want to listen to. You can find this information on the internet or in a weather forecast. Once you have the frequency, you can enter it into the scanner by following these steps:
1. Press the Menu button.
2. Use the arrow buttons to select “Channel/Frequency.”
3. Press the Enter button.
4. Enter the frequency of the weather station that you want to listen to.
5. Press the Exit button to save the frequency.
The second way to program your scanner is to use the Radio Shack Scanner Programmer software. This software can be downloaded for free from the Radio Shack website. To use the software, you will need to know the frequency of the weather station that you want to listen to and the type of weather station that it is. You can find this information on the internet or in a weather forecast. Once you have the information, you can enter it into the software by following these steps:
1. Open the Radio Shack Scanner Programmer software.
2. Click on the “File” menu and select “Open.”
3. Locate the folder where the scanner programming files are stored.
4. Select the file that corresponds to the type of weather station that you want to listen to.
5. Click on the “Open” button.
6. Click on the “Channel” menu and select “Frequency.”
7. Enter the frequency of the weather station that you want to listen to.
8. Click on the “Save” button.
The third way to program your scanner is to use the Weather Radio Frequency Finder website. This website can be used to find the frequency of weather stations all over the world. To use the website, you will need to know the name of the city or country that you want to listen to. You can find the name of the city or country by looking it up in a weather forecast or on the internet. Once you have the name of the city or country, you can enter it into the website by following these steps:
1. Go to the Weather Radio Frequency Finder website.
2. Enter the name of the city or country that you want to listen to.
3. Click on the “Search” button.
4. Scroll through the list of weather stations until you find the one that you want to listen to.
5. Click on the “Frequency” tab.
6. Copy the frequency of the weather station that you want to listen to.
7. Paste the frequency into the scanner programming software.
8. Click on the “Save” button.
How do I program my radio Shack digital trunking scanner?
If you have a Radio Shack digital trunking scanner, you may be wondering how to program it. This article will show you how.
To program your scanner, you will need the programming software and the scanner’s programming cable. The programming software can be downloaded from Radio Shack’s website.
Once you have the software installed, connect the programming cable to the scanner and your computer. Open the programming software and select your scanner from the list.
The programming software will open a window with a list of channels. To program a channel, select it from the list and enter the frequency and mode. You can also enter the channel’s name and description.
When you are finished programming the channels, save the file and disconnect the programming cable. Your scanner is now programmed and ready to use.
How do I program my 800 MHz scanner?
800 MHz scanners are used to monitor unencrypted public safety radio traffic. In order to program your 800 MHz scanner, you will need the frequency and tone of voice for the channel you want to listen to.
Each scanner has its own programming procedure, so you will need to consult your scanner’s user manual. However, most scanners can be programmed by pressing a series of buttons in a specific order.
First, find the frequency you want to monitor. You can find this information in a variety of places, including online databases, radio frequency listings in magazines, or online ham radio forums.
Once you have the frequency, you will need to find the tone of voice for that channel. This information is also available online or in published frequency listings.
Once you have both the frequency and tone of voice, you can program your scanner. Consult your scanner’s user manual for specific instructions. However, most scanners can be programmed by pressing the following buttons in this order:
1. Turn your scanner on
2. Press the Menu button
3. Use the arrow buttons to scroll to the System Settings menu
4. Press the Enter button
5. Scroll to the Squelch type menu
6. Press the Enter button
7. Scroll to the Tone type menu
8. Press the Enter button
9. Scroll to the Frequency type menu
10. Press the Enter button
11. Enter the frequency in the Frequency field
12. Enter the tone in the Tone field
13. Press the Save button
How can I listen to a trunked police radio?
There are a few ways that you can listen to a trunked police radio. The first way is to find a scanner that can monitor the trunked radio frequencies. There are a few different brands of scanners that can do this, but the most popular scanner for listening to trunked police radios is the Uniden BCD996XT.
The second way is to use a software program that can monitor the frequencies for you. There are a few different programs that can do this, but the most popular program is ProScan. This program can be downloaded for free from the ProScan website.
The third way is to use an online service that can monitor the frequencies for you. The most popular online service for this is RadioReference.com. This service is free to use, but you will need to create an account and register your scanner in order to use it.
Can you use a CB radio as a police scanner?
There are a few things to consider when using a CB radio as a police scanner. The first is that not all CB radios can be used as police scanners. Many radios have a scan function that only scans the channels that the radio is programmed to scan. Others have a scan function that will scan all 40 channels, but these radios are not typically marketed as police scanners.
The second thing to consider is the legality of using a CB radio as a police scanner. In the United States, it is legal to use a CB radio as a police scanner. However, it is illegal to use a scanner to intercept any type of communication that is not specifically intended for you. This means that you cannot use a CB radio to listen to police or emergency communications if you are not a part of the emergency response team.
The final thing to consider is the functionality of a CB radio as a police scanner. Not all CB radios have the same features, and not all police scanners have the same features. It is important to research the specific radio and scanner that you are interested in to make sure that they have the features that you need.
How do you program a handheld police scanner?
Programming a handheld police scanner is not as difficult as one might think. In fact, with a few basic instructions, just about anyone can do it.
The first step is to identify the programming frequencies for your area. These frequencies can be found in the local police department’s operations manual, or online. Once you have these frequencies, you can begin programming your scanner.
To program your scanner, you will need to know the frequency, the CTCSS tone (if applicable), and the channel number. If you are not sure how to find these settings, consult your scanner’s owners manual.
Once you have the frequency, tone, and channel number, you can begin programming your scanner. To program a scanner, you will need to know the specific steps for your model. However, most scanners can be programmed in a similar manner.
First, turn on your scanner and set it to the frequency you want to program. Then, enter the CTCSS tone, if applicable. Next, enter the channel number. Finally, hit the programming button.
Your scanner should now be programmed to the desired frequency.