The Radioshack Same Weather Radio 12-991 is a digital weather alert radio that can receive both National Oceanic and Atmospheric Administration (NOAA) weather alerts and Emergency Alert System (EAS) messages. The device has a built-in flashlight, a LCD display, and a headphone jack. It can also play back voice alerts and weather forecasts.
The weather alert radio can be programmed to receive weather alerts for a specific county or counties in the United States. The device will sound an alarm and display an alert message when a weather warning is issued for a designated area. The weather alert radio can also be programmed to provide weather forecasts for a specific area.
The weather alert radio has a built-in flashlight that can be used to provide light in an emergency situation. The LCD display can be used to view weather alerts, forecasts, and time and date information. The weather alert radio also has a headphone jack that can be used to listen to weather alerts and forecasts.
Contents
- 1 How do I set my Radio Shack weather radio?
- 2 How do I program my weather alert radio?
- 3 How do I change the channel on my NOAA weather radio?
- 4 What does check op mean on weather radio?
- 5 What channel should I set my weather radio to?
- 6 How do I program my Radio Shack NOAA scanner?
- 7 What is the SAME code?
How do I set my Radio Shack weather radio?
Setting up your Radio Shack weather radio is a relatively easy process. You will need to find an open area to place the radio, as it needs to be able to pick up signals from the National Weather Service. Once you have found a spot, plug the power cord in and turn the unit on.
The next step is to find the proper channel. You can find this information in the user manual, or by visiting the National Weather Service website. Once you have the correct channel, hold down the “channel up” or “channel down” button to find the frequency.
Now that you have the frequency, hold down the “alert” button to turn on the weather alert function. You will then hear a tone and see the word “ALERT” flash on the screen. To turn off the weather alert function, hold down the “alert” button again.
You can also set the radio to alarm mode, which will sound an alarm when a weather alert is issued. To do this, hold down the “alarm” button. You can then set the alarm to sound for a specific type of weather event, or turn it off altogether.
To save power, you can also put the radio in sleep mode. To do this, press the “power” button to turn the unit off. Then, press the “power” button again to turn it on. The radio will then go into sleep mode. To exit sleep mode, press the “power” button again.
How do I program my weather alert radio?
A weather alert radio is a device that emits an alarm sound to warn you of an incoming weather event, such as a tornado or hurricane. Many weather alert radios also provide information about the event, such as the location and severity.
Programming your weather alert radio is a simple process that only takes a few minutes. The first step is to find the weather alert codes for your area. These codes can be found on your local weather service’s website or in the local newspaper.
Once you have the codes, enter them into your weather alert radio. Each code corresponds to a specific type of weather event. You can then choose to have the radio emit an alarm sound or simply provide a message about the event.
Most weather alert radios also have a weather band feature that allows you to listen to local weather forecasts and reports.
How do I change the channel on my NOAA weather radio?
A NOAA weather radio is a great tool to have during severe weather events. It can provide you with weather alerts and updates so you can stay safe. If you need to change the channel on your NOAA weather radio, there are a few steps you can take.
The first step is to locate the channel knob on the side of the radio. This knob will have numbers on it, and you will need to turn it to the channel you want to listen to. There are a few different channels that you can choose from, depending on your location.
The second step is to find the “channel lock” button on the front of the radio. This button will be in the shape of a key, and you will need to press it in order to change the channel.
Once you have found the channel knob and the channel lock button, you can start changing the channel on your NOAA weather radio.
What does check op mean on weather radio?
What does check op mean on weather radios?
One possible definition is that “check op” is an abbreviation for “check operation.” This phrase may be used by broadcasters to let listeners know that they are checking the equipment and making sure everything is working correctly before going on the air.
Another possible definition is that “check op” is an abbreviation for “check out.” This phrase may be used by broadcasters to let listeners know that they are about to end the broadcast and are asking for feedback from listeners.
What channel should I set my weather radio to?
When severe weather threatens, it’s important to have a weather radio to stay up-to-date on the latest conditions. But what channel should you set your weather radio to?
The National Weather Service (NWS) broadcasts weather alerts on many different channels, so it can be confusing to know which one to tune in to. Here is a breakdown of the channels you might hear on your weather radio, and when you should listen to them:
Channel 1: This channel is used for tornado warnings and other critical weather alerts for a specific county or counties.
Channel 2: This channel is used for tornado warnings and other critical weather alerts for a specific state.
Channel 3: This channel is used for tornado warnings and other critical weather alerts for a specific region (for example, the Midwest).
Channel 4: This channel is used for severe thunderstorm warnings.
Channel 5: This channel is used for flash flood warnings.
Channel 6: This channel is used for marine weather warnings and forecasts.
Channel 7: This channel is used for special weather statements (for example, winter weather alerts).
Channel 8: This channel is used for weather alerts that are not specific to tornadoes, severe thunderstorms, flash flooding, or marine weather.
It’s important to note that weather alerts can be issued for other hazards, such as hurricanes, winter storms, and wildfires, so it’s a good idea to listen to all of the channels on your weather radio.
In general, you should listen to channels 1, 2, 3, and 4 if you live in a tornado-prone area, and channels 5 and 6 if you live in a flood-prone area. If you’re not sure which channel to listen to, the NWS has a handy online tool that can help you find the right one.
So, what channel should you set your weather radio to? It depends on your location and the type of weather threats you are most likely to face. But, in general, you should listen to channels 1, 2, 3, 4, 5, and 6.
How do I program my Radio Shack NOAA scanner?
A Radio Shack NOAA scanner is a handheld device that scans weather channels and alerts you to severe weather conditions in your area. You can program your scanner to receive specific weather alerts for your area.
To program your Radio Shack NOAA scanner, first find the NOAA weather frequency for your area. This can be found online or in a local newspaper. The frequency will be in the form of a number, such as 162.400.
Next, find the tone of voice that you want your scanner to use for alerts. There are several different tones of voice available, depending on the severity of the weather conditions.
Once you have the frequency and tone of voice chosen, you can program your scanner. This process will vary depending on the model of scanner that you have. Generally, you will need to press a series of buttons to enter the frequency and tone of voice. Consult your scanner’s user manual for more specific instructions.
What is the SAME code?
What is the SAME code?
The SAME code is a set of numbers and letters that is used to identify a particular property. The code is used to ensure that the property is registered with the appropriate authorities.
The SAME code is also used to ensure that the property is correctly insured. The code is made up of two parts: the first part is a number that identifies the property, and the second part is a letter that identifies the authority that issued the code.
The code is used to protect the property owner and the authorities. It is important to ensure that the code is correct, as incorrect information could lead to problems.